Keithley 4200-SCS Reference Manual page 1530

Appendix H: Suss MicroTec PA-200 Prober
probesites KITE project example
The following is a step-by-step procedure to properly configure the PA-200 so the probesites
KITE project executes successfully.
NOTE:
1. Select the ProberBench NT icon (shortcut) on desktop
Figure H-30
ProberBench NT icon
2. From the ProberBench NT window, select WaferMap file
Figure H-31
ProberBench NT window
H-22
The following configuration is accomplished using the ProberBench NT computer.
Return to Section Topics
Model 4200-SCS Reference Manual
(Figure H-30).
(Figure H-31).
4200-901-01 Rev. S / May 2017