Keithley 4200-SCS Reference Manual page 1670

Appendix N: Additional User Libraries
ShortCal4294 user module
User module description
The ShortCal4294 routine performs SHORT calibration for the HP 4294 IMP meter.
shows the default parameters for the ShortCal4294 user module. After SHORT calibration is
performed, it should then be verified by performing an FiSweep on the calibration device.
Syntax:
status = ShortCal4294(char *Inststr, int Adaptor, double ShortRefR, double ShortRefL);
Figure N-6
ShortCal4294 user module (default parameters)
INPUTS:
InstldStr
Adaptor
ShortRefR
ShortRefL
RETURNED STATUS VALUES:
Returned values are placed in the spread sheet (Sheet tab).
0
-10030
-10090
-10100
-10102
N-10
(char *) KCON instrument ID. Default is CMTR1.
(int) Type of cable adapter. Valid input is 1 to 4:
1 Specifies Agilent 16048G (2 pairs of 1-meter coaxial cables).
2 Specifies Agilent 16048H (2 pairs of 2-meter coaxial cables).
3 Specifies Agilent 42942A (7-millimeter 42942A probe).
4 Specifies Agilent 42941A (Advanced impedance probe).
(double) Reference resistance value of the SHORT.
(double) Reference inductance value of the SHORT.
OK.
HP 4294 not in KCON.
GPIB time-out occurred during communications.
An invalid input parameter is specified.
There is an error when parsing the HP 4294's response.
Return to Section Topics
Model 4200-SCS Reference Manual
Figure N-6
4200-901-01 Rev. S / May 2017