Keithley 4200-SCS Reference Manual page 1534

Appendix H: Suss MicroTec PA-200 Prober
Figure H-38
KITE: probesites project
2. Select the top node in the ProjectView tab of the Project Navigator window.
3. Click the green Run button.
probesubsites KITE project example
The following is a step-by-step procedure to properly configure the PA-200 so the probesubsites
KITE project executes successfully.
NOTE:
1. Select the ProberBench NT icon (shortcut) on the desktop
Figure H-39
ProberBench NT icon
H-26
The following configuration is accomplished using the ProberBench NT computer.
Return to Section Topics
Model 4200-SCS Reference Manual
(Figure H-39).
4200-901-01 Rev. S / May 2017