Keithley 4200-SCS Reference Manual page 1577

Model 4200-SCS Reference Manual
3.
Figure J-9
KCON: Saving
Keithley Interactive Test Environment (KITE)
NOTE:
Use KITE to load and run the probesites project using the new configuration file that will allow
you to execute the project for this prober.
1.
2.
Figure J-10
KITE: probesites project
3.
4200-901-01 Rev. S / May 2017
Save the configuration from the File menu on the Keithley CONfiguration utility window
(Figure J-9).
The following configuration is accomplished using the 4200-SCS computer.
Load the probesites project example from KITE
a. Run KITE.
b. Select Open Project from the File menu.
c. Open the folder
c:\S4200\kiuser\Projects\_Miscellaneous\probesites
d. Select the project file probesites.kpr
Select the top node in the ProjectView tab of the Project Navigator window
Click the green Run button.
Return to Section Topics
Appendix J: Using a Manual or Fake Prober
(Figure J-10):
(Figure J-10).
J-7