Appendix K: Cascade Summit-12000 Prober
Figure K-45
KCON: selecting a prober
Figure K-46
KCON: Save Configuration
KITE
NOTE:
Use KITE to open and run the probesites project using the new configuration file, which will allow
you to execute the project for this prober:
1.
Open the probesites project example from KITE
a. Run KITE.
b. Select Open Project from the file menu.
c. Open the folder c:\S4200\kiuser\Projects\_Miscellaneous\probesites.
d. Select the project file probesites.kpr.
K-24
The following configuration is accomplished using the 4200-SCS computer.
Return to
(Figure
Section Topics
Model 4200-SCS Reference Manual
K-47):
4200-901-01 Rev. S / May 2017