Keithley 4200-SCS Reference Manual page 1566

Appendix I: Micromanipulator 8860 Prober
Figure I-48
Multiple subsites per die
NOTE:
To start pcIndie:
1. Start pcIndie by clicking the pcIndie button
The pcIndie window will appear
Figure I-49
pcIndie button
2. Using the joystick and microscope, move to the first subsite to be tested.
3. Click add/ins into list.
NOTE:
4. Repeat steps 2 and 3 for each subsite to be entered into the program listing.
5. Save by clicking the pcIndie save button and assigning the listing a unique file name (*.idp)
(Figure
6. To open an existing program listing file, click the pcIndie open button in the pcIndie window.
Select the desired file, and click OK
I-26
Using this type of pattern allows the project structure to issue two PrSSMovNxt
commands within the loop for each die to be probed. Refer to
illustration of a repeatable pattern.
1
2
1
2
1
2
Ensure that all steps of Setup have been completed before starting pcIndie.
The add button adds the description of the present position to the end of the
program listing and the ins button inserts the present position above the highlighted
entry in the program listing. The rep button replaces the highlighted entry with the
present position and the del button deletes the highlighted entry.
I-50).
Return to
1
2
1
2
(Figure I-49) located in the pcLaunch window.
(Figure I-52).
(Figure I-51).
Section Topics
Model 4200-SCS Reference Manual
Figure I-48
Step0001
Step0002
Step0003
Step0004
Step0005
Step0006
Step0007
Step0008
Step0009
Step0010
4200-901-01 Rev. S / May 2017
for an