Keithley 4200-SCS Reference Manual page 1628

Appendix L: Signatone CM500 Prober
5. Press the To First Site button to move the prober to the first programmed site for testing.
Make sure Subsite (template) is disabled here
Figure L-28
CM500 Prober Run Program Site window
6. In the File menu bar, select the Save setup As command to save the file to hard disk. The
user can load this setup later without going through all the procedures again.
7. The Prober is now ready to accept remote command from S4200.
Figure L-29
CM500 Prober save setup
Case 2: Programmed sites with subsites setup
8. Pick the Edit Subsite icon on toolbar.
Figure L-30
CM500 Prober Edit Subsite icon
L-14 Return to Section Topics
Model 4200-SCS Reference Manual
(Figure L-28).
4200-901-01 Rev. S / May 2017