Keithley 4200-SCS Reference Manual page 1563

Model 4200-SCS Reference Manual
Figure I-44
KCON: Adding a prober
2.
NOTE:
Figure I-45
KCON: Selecting a prober
4200-901-01 Rev. S / May 2017
Select the Micromanipulator 8860 prober as the model
Number of Pins / Positioners is correct.
The number of pins defined in the probe station properties determines the pins that
are available to assign to a switch matrix card column. Make sure the number of pins
assigned is appropriate for your system.
Return to Section Topics
Appendix I: Micromanipulator 8860 Prober
(Figure I-45). Also ensure that the
I-23