Model 4200-SCS Reference Manual
Figure I-55
KCON: Saving
KITE
Use KITE to load and run the project.
NOTE:
Use the following procedure as a guide to load and run the probesubsites project:
1.
2.
3.
To load the probesites project:
1.
2.
3.
4.
Figure I-56
KITE probesubsites project
4200-901-01 Rev. S / May 2017
The following configuration is accomplished using the Model 4200-SCS computer.
Load the probesubsites project example from KITE
Select the top node in the ProjectView tab of the Project Navigator window.
Click the green Run button.
Run KITE
Select Open Project from the File menu
Open the folder c:\S4200\kiuser\Projects\_Miscellaneous\probesites
Select the Project File probesubsites.kpr.
Return to
Section Topics
Appendix I: Micromanipulator 8860 Prober
(Figure
I-56).
I-29