Keithley 4200-SCS Reference Manual page 1574

Appendix J: Using a Manual or Fake Prober
Modifying the prober configuration file
NOTE:
The default prober configuration file for a manual prober (MANL) is represented in
for the fake prober, in
GPIB prober communications, while the fake configuration file is configured for serial prober
communications. To make changes, use Microsoft Windows
the files have been completely configured at the factory).
Configuration file locations:
Figure J-5
Sample manual prober configuration file
# prbcnfg.dat
#
# The following tag, "PRBCNFG", is used by the engine in order to
determine
# the MAX number of SLOTS and CASSETTES for a given prober at runtime.
#
<PRBCNFG>
#
# for OPTIONS "" == NULL, max 32 chars in string
#
# Example
#
#PROBER_1_OPTIONS=1,1,1,1,1,1
#
#
# OcrPresent
# AutoAlnPresent
# ProfilerPresent
# HotchuckPresent
# HandlerPresent
# Probe2PadPresent
#
# Configuration for MANuaL probers (S900NT):
# MANL
#
PROBER_1_PROBTYPE=MANL
PROBER_1_OPTIONS=0,0,0,0,1,0
PROBER_1_IO_MODE=GPIB
PROBER_1_GPIB_UNIT=0
PROBER_1_GPIB_SLOT=1
PROBER_1_GPIB_ADDRESS=5
PROBER_1_GPIB_WRITEMODE=0
PROBER_1_GPIB_READMODE=2
PROBER_1_GPIB_TERMINATOR=10
PROBER_1_TIMEOUT=300
J-4
This file is modified using the Model 4200-SCS computer.
Figure J-6. As shown, the manual configuration file is configured for use with
- EXAMPLE Prober Configuration File MANL Prober
01234567890
Return to
C:\S4200\sys\dat\prbcnfg_FAKE.dat
C:\S4200\sys\dat\prbcnfg_MANL.dat
Section Topics
Model 4200-SCS Reference Manual
Figure
® ®
Notepad (no changes are required;
4200-901-01 Rev. S / May 2017
J-5, and