Table of Contents
Advertisement
Appendix K: Cascade Summit-12000 Prober
KITE
NOTE:
Use KITE to open and run the probesubsites project using the new configuration file, which will
allow you to execute the project for this prober.
Open the probesubsites project example from KITE
1.
Run KITE.
2.
Select Open Project from the file menu.
3.
Open the folder c:\S4200\kiuser\Projects\_Miscellaneous\probesubsites.
4.
Select the project file probesubsites.kpr.
Figure K-61
KITE Open Project
K-32
The following configuration is accomplished using the 4200-SCS computer.
Return to
(Figure
Section Topics
Model 4200-SCS Reference Manual
K-61):
4200-901-01 Rev. S / May 2017
Advertisement
Chapters
Table of Contents
