Keithley 4200-SCS Reference Manual page 1695

Model 4200-SCS Reference Manual
Change a parameter name
With the Parameters tab selected, the parameter names for the module are listed in a table
located at the bottom of the window. Change the parameter name "Rdson" (shown in
Figure
change.
Change the module description
Click the Description tab to display the description for the module. Above DESCRIPTION, change
MODULE: Rdson42xx to MODULE: RdsonAvg as shown in
occurrences of Rdson with Rdson10. In KITE, any UTMs that are connected to this module will
show the text that is entered on the Description tab in KULT.
Figure O-26
Module name for Description
Save, compile, and build the modified library
The user module has to be saved and compiled. Finally, the library must be rebuilt to ensure that
the new module is available for use by KITE UTMs. These operations are performed from the File
and Options menus.
In the order shown in
windows will be displayed to indicate that the compile and library building operations are in
process. For details, refer to the
Figure O-27
Save, compile, and build library
A. Select Save Module
4200-901-01 Rev. S / May 2017
O-24) to "Rdson10". After typing in the new parameter name, click Apply to enter the
Figure O-27, save, compile, and build the library. Note that pop-up
B. Select Compile
Library
Return to Section Topics
Keithley User Library Tool (KULT), Section
C. Select Build
Appendix O: Advanced Applications
Figure O-26. In addition, replace all
8.
O-19