Keithley 4200-SCS Reference Manual page 1537

Model 4200-SCS Reference Manual
KCON
Use KCON to add the prober to the configuration:
NOTE:
1.
Figure H-44
KCON: Adding a prober
2.
NOTE:
Figure H-45
KCON: Selecting a prober
4200-901-01 Rev. S / May 2017
The following configuration is accomplished using the 4200-SCS computer.
From the Tools menu (on Keithley CONfiguration Utility window), click Add External
Instrument > Probe Station
Select the Karl Suss prober as the model
Positioners is correct.
The number of pins defined in the probe station properties determines the pins that
are available to assign to a switch matrix card column. Make sure the number of pins
assigned is appropriate for your system.
Return to
(Figure H-44). The probe station Properties tab appears.
(Figure
Section Topics
Appendix H: Suss MicroTec PA-200 Prober
H-45). Ensure that the Number of Pins /
H-29