Logging In - Proxim AP-4900MR-LR Quick Install Manual

d. Enter a static IP Address for the AP in the field provided. You must
assign the unit a unique address that is valid on your IP subnet.
e. Enter your network's Subnet.Mask.
f. Enter your network's Gateway.IP.Address.
g. Enter the SNMP read/write password in the Read/Write.Password
field.
h. Click OK to save your changes. The Access Point will reboot
automatically and any changes you made will take effect.
i. When prompted, click OK a second time to return to the Scan List
screen.
j. Click Cancel to close the ScanTool.

logging In

Once the AP has a valid IP Address and an Ethernet connection, you may use
your web browser to monitor and configure the AP. (To configure and monitor
using the command line interface, see the AP-4900MR-LR User Guide)
1. Open a Web browser on a network computer.
2. If necessary, disable the browser's Internet proxy settings.
3. Enter the Access Point's IP address in the browser's Address field and
press Enter or Go. This is either the dynamic IP address assigned by a
network DHCP server or the static IP address you manually configured. See
Using ScanTool for information on how to determine the unit's IP address
and manually configure a new IP address, if necessary.
Note:.
Mesh APs must be configured with static IP addresses.
4. The Enter Network Password screen appears.
Page 22
For new units, the default password is public.
Copyright © 2006 Proxim Wireless