Accessing The Graphical User Interface; Logging In - Proxim Edge MP-1035-CPE Device Management Manual

Accessing the Graphical User
Interface

3.1 Accessing the Graphical User Interface

To access the Graphical User Interface (GUI), connect the device to a PC or a laptop and enter the default device IP address in
the address bar (http://169.254.128.132). Alternatively, use ScanTool to access the device. See

3.2 Logging In

Once the device connects to the network, the Windows Security page prompts the user to enter the username and the
password.
To login to the device:
1. Type a valid user name in the Username box. Based on the privilege level, three types of users are defined:
•
Administrator: Administrator user has access to all the features of the device. This user has the privilege to
change his/her password and that of Monitor user. By default, the username is admin.
•
Monitor: Monitor user has only view access to all the features of the device and restricted from changing his/her
password or run any of the test tools. However, this user is given the privilege to retrieve logs for debugging. By
default, the username is monitor.
•
Advanced: Advanced user is identical to the administrator user, but has the privilege to change the advanced
settings of the device. By default, the username is advanced.
2. Type the password in the Password box. By default, the password is public for all the users.
:
•
For security reasons, It is recommended to change the password after the first login. You can change the
password from the Management tab in the GUI.
•
Administrator and Advanced user share the same password; changing the administrator user password also
changes the advanced user password.
Device Management Guide
Figure 3-1 Login Screen
3
ScanTool
for more details.
20