Logging.in - Proxim AP-4000MR-LR Quick Install Manual

d. Enter a static IP Address for the AP in the field provided. You must
assign.the.unit.a.unique.address.that.is.valid.on.your.IP.subnet..
e. Enter your network's Subnet.Mask.
f. Enter your network's Gateway.IP.Address.
g. Enter.the.SNMP.read/write.password.in.the.Read/Write.Password.
field.
h. Click.OK.to.save.your.changes..The.Access.Point.will.reboot.
automatically.and.any.changes.you.made.will.take.effect.
i. When.prompted,.click.OK.a.second.time.to.return.to.the.Scan.List.
screen.
j. Click.Cancel.to.close.the.ScanTool.
logging In
Once.the.AP.has.a.valid.IP.Address.and.an.Ethernet.connection,.you.may.use.
your web browser to monitor and configure the AP. (To configure and monitor
using.the.command.line.interface,.see.the.AP-4000MR-LR User Guide)
1. Open.a.Web.browser.on.a.network.computer..
2. If necessary, disable the browser's Internet proxy settings.
3. Enter the Access Point's IP address in the browser's Address field and
press.Enter.or.Go..This.is.either.the.dynamic.IP.address.assigned.by.a.
network DHCP server or the static IP address you manually configured. See
Using ScanTool for information on how to determine the unit's IP address
and manually configure a new IP address, if necessary.
Note:.
Mesh APs must be configured with static IP addresses.
4. The.Enter.Network.Password.screen.appears.
Page 22
For.new.units,.the.default.password.is.public.
Copyright © 2006 Proxim Wireless