Airflow Direction In The Qfx10016; Table 14: Qfx100016 Fan Tray Controller Specifications - Juniper QFX10016 Hardware Manual

QFX10016 Switch Hardware Guide

Table 14: QFX100016 Fan Tray Controller Specifications

Specification
Height
Width
Depth
Weight

Airflow Direction in the QFX10016

36
Fan Tray 1 Fan 11
Fan Tray 1 Fan 12
Fan Tray 1 Fan 13
Fan Tray 1 Fan 14
Fan Tray 1 Fan 15
Fan Tray 1 Fan 16
Fan Tray 1 Fan 17
Fan Tray 1 Fan 18
Fan Tray 1 Fan 19
Fan Tray 1 Fan 20
user@device>
See Table 14 on page 36 for the physical specifications for the fan tray controllers.
Value
1.5 in. (3.81 cm)
6.5 in. (15.24 cm)
12.4 in. (31.5 cm)
1.5 lbs. (0.68 kg)
The air intake to cool the chassis is located on the port (line card) side of the chassis. Air
flows into the chassis from the ports in the Control Boards and line cards, through the
Switch Interface Boards (SIBs), and exits from the fan trays and the power supplies. This
airflow is called port-to-FRU cooling or airflow out (AFO). See
OK 4500 Spinning at normal speed
OK 4500 Spinning at normal speed
OK 4650 Spinning at normal speed
OK 4500 Spinning at normal speed
OK 4650 Spinning at normal speed
OK 4650 Spinning at normal speed
OK 4650 Spinning at normal speed
OK 4650 Spinning at normal speed
OK 4500 Spinning at normal speed
OK 4500 Spinning at normal speed
Figure 23 on page
Copyright © 2017, Juniper Networks, Inc.
37.