Supplementary Power Supply Regulations; Figure 17: Power Supply Concept; Table 8: Filter Modules For 24 V Supply - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
3.6.5

Supplementary Power Supply Regulations

The WAGO-I/O-SYSTEM 750 can also be used in shipbuilding or offshore and
onshore areas of work (e. g. working platforms, loading plants). This is
demonstrated by complying with the standards of influential classification
companies such as Germanischer Lloyd and Lloyds Register.
Filter modules for 24 V supply are required for the certified operation of the
system.

Table 8: Filter Modules for 24 V Supply

Order No.
750-626
750-624
Therefore, the following power supply concept must be absolutely complied with.

Figure 17: Power Supply Concept

Use a supply module for equipotential bonding!
Use an additional 750-601/ 602/ 610 Supply Module behind the 750-626 Filter
Module if you want to use the lower power jumper contact for equipotential
bonding, e.g., between shielded connections and require an additional tap for this
potential.
Name Description
Supply Filter Filter module for system supply and field supply
(24 V, 0 V), i. e. for fieldbus coupler/controller and bus
power supply (750-613)
Supply Filter Filter module for the 24 V field supply
(750-602, 750-601, 750-610)
System Description
Manual
1.5.0
39