Wago Io-Link Configurator; Wago Webserver I/O Field - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000

5.5.2 WAGO IO-Link Configurator

The WAGO IO-Link Configurator is an independent commissioning, configuration and
management software program. The software replaces the earlier IO-Link plug-in for
WAGO-I/O-CHECK.
The WAGO IO-Link Configurator software is used for configuring and parameterizing IO-
Link devices. It supports a large number of IO-Link masters and IO-Link sensors/actua-
tors. Within the software, you can switch between the IO-Link masters of a node that are
used without having to switch back to WAGO-I/O-CHECK. In addition, the handling of
IODD (device description files for IO-Link modules) is more flexible. For example, you can
access the IODD server directly to import IODDs.
The WAGO IO-Link Configurator software can be launched as a stand-alone program
from the Start menu or with the desktop icon, or in connection with WAGO I/O-CHECK. It
then provides the functions necessary for connecting to accessible WAGO IO-Link mas-
ters or searching for them.
You can find further information in the product manual WAGO IO-Link Configurator.
The manual is available in the download area for the WAGO IO-Link Configurator soft-
ware at ü www.wago.com, item number 0765-4501/0100-0000.

5.5.3 WAGO Webserver I/O Field

The WAGO I/O System Field module has an integrated Webserver. It can be accessed
with a standard Web browser in order to use the following functions:
• Display port information for ports X01, X02 etc.
• Display and modify module settings.
• User setup and management, as well as user login and logout
• Reset module to factory settings and restart firmware.
• Simulating inputs; forcing outputs
Examples of port information include:
• Display current measured values for the ports: temperature, voltage, current and state
on pins 1, 2 and 4
• Display information about the connected IO-Link module
• Display the status information for the entire port
• Configure ports, e.g. set operating mode
• Read and write access to the connected IO-Link devices
• Show process data
The module settings include:
• Select method for obtaining IP address
• Select the origin of the configuration data used
• Display and enter maintenance information
• Reset module to factory settings.
• Load firmware onto the module
• Display and set parameters for Bluetooth
• Update Bluetooth
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
®
®
firmware
connection to the module
Functions
51