Wago Io-Link Configurator - WAGO 765-4203/0100-0000 Product Manual

Functions
Tool
WAGO I/O Field App
WAGO IO-Link Configura-
tor
Note
Parameters via EtherCAT
Each time EtherCAT
and parameters to the module. Port configuration parameters that were set by the WAGO
I/O Field Webserver, the WAGO I/O Field app, the WAGO IO-Link Configurator or the
OPC UA client are overwritten.
If you have changed parameters of the port configuration via the WAGO I/O Field Web-
server, the WAGO I/O Field app, the WAGO IO-Link Configurator or the OPC UA Client,
please note that these changes are initially applied by the module, but the EtherCAT
master overwrites the port configuration again at the next start-up. If you want to change
parameters of the port configuration, set them in the configuration software of the Ether-
®
CAT

5.5.2 WAGO IO-Link Configurator

The WAGO IO-Link Configurator is an independent commissioning, configuration and
management software program. The software replaces the earlier IO-Link plug-in for
WAGO-I/O-CHECK.
The WAGO IO-Link Configurator software is used for configuring and parameterizing IO-
Link devices. It supports a large number of IO-Link masters and IO-Link sensors/actua-
tors. Within the software, you can switch between the IO-Link masters of a node that are
used without having to switch back to WAGO-I/O-CHECK. In addition, the handling of
IODD (device description files for IO-Link modules) is more flexible. For example, you can
access the IODD server directly to import IODDs.
32 Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
EtherCAT
–
-
®
are always rewritten upon restart
®
communication starts up, the master transfers the configuration
master.
®
Module Port Configuration
Yes
Yes
765-4203/0100-0000
IO-Link Device Configu-
ration
Objects can be read and
written by means of the
object index and subindex.
This requires expert
knowledge and the object
description for the IO-Link
device used.
The I/O Field Webserver
does not evaluate an
IODD;
Yes
IODD can be used by the
app to parameterize an IO-
Link device.
Yes
IODD can be used by the
IO-Link configurator to pa-
rameterize an IO-Link de-
vice.
®