Do you have a question about the TS5160 and is the answer not in the manual?
Questions and answers
Valmai Lesley Semple
March 1, 2025
How do I change the printer cartridges in Canon TS5160
1 comments:
Mr. Anderson
May 14, 2025
To change the printer cartridges in a Canon PIXMA TS5160:
1. Make sure the printer is turned on. 2. Open the scanning unit/cover. The print head holder will move to the replacement position. 3. Wait until the holder stops moving. 4. Remove the empty FINE cartridge by gently pushing it down and pulling it out. 5. Take the new FINE cartridge out of its package and remove the protective tape. 6. Insert the new cartridge into the holder at a slight angle, then push it up until it clicks into place. 7. Close the scanning unit/cover.
Make sure to install both the black and color cartridges. If either is missing, the printer will show an error and not print.
Need help?
Do you have a question about the TS5160 and is the answer not in the manual?
Questions and answers
How do I change the printer cartridges in Canon TS5160
To change the printer cartridges in a Canon PIXMA TS5160:
1. Make sure the printer is turned on.
2. Open the scanning unit/cover. The print head holder will move to the replacement position.
3. Wait until the holder stops moving.
4. Remove the empty FINE cartridge by gently pushing it down and pulling it out.
5. Take the new FINE cartridge out of its package and remove the protective tape.
6. Insert the new cartridge into the holder at a slight angle, then push it up until it clicks into place.
7. Close the scanning unit/cover.
Make sure to install both the black and color cartridges. If either is missing, the printer will show an error and not print.
This answer is automatically generated
printer says ink absorber is nearly full