Standards/Adjustments; Ii. Standards/Adjustments; Image Adjustment; Adjusting The Image Leading Edge Margin - Canon NP6260 Service Manual

II. STANDARDS/ADJUSTMENTS

A. Image Adjustment

1. Adjusting the Image Leading Edge Margin

Select 'LE_BLANK' in service mode (
Make adjustments so that the image leading edge margin is 4.5 ±1.5 mm when the
Test Sheet is copied in Direct.
(unit: 0.1 mm)

2. Adjusting the Image Leading Edge Non-Image Width (registration)

Select 'REGIST' in service mode (
Make adjustments so that the image leading edge non-image width is 4.5 ±1.5 mm
when the Test Sheet is copied in Direct.
(unit: 0.1 mm)
COPYRIGHT © 1997 CANON INC.
Figure 11-201
3
Figure 11-202
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 TROUBLESHOOTING
).
3
4.5±1.5mm
).
4.5±1.5mm
11-5