Using Tsb For Upgrading The Firmware - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

Using TSB for upgrading the firmware

After downloading the new flash file from the Keithley Instruments website, you can use Test Script
Builder (TSB) to upgrade the firmware of your Series 2600B.
1. If not already running, start Test Script Builder (on the PC desktop, double-click the icon for the
Test Script Builder).
2. On the Instrument Console toolbar, click the Open Instrument icon and then select your
communication interface from the Select Instrument Resource dialog box. See the section on
TSP Programming Fundamentals for details on opening communications.
3. On the Instrument Console toolbar, click the Flash memory icon to display a drop-down menu.
4. From the drop-down menu, select Instrument and then click Flash.
5. From the Select A Firmware Data File dialog box, use the browser to select the file name of the
new firmware and click Open to upgrade the firmware.
2600BS-901-01 Rev. B / May 2013
Figure 143: Open Instrument icon
Figure 144: Flash memory icon
Appendix A: Maintenance
A-5