Section 7: TSP command reference
tsplink.trigger[N].stimulus
This attribute specifies the event that causes the synchronization line to assert a trigger. This attribute is not
available on the Models 2604B/2614B/2634B.
Type
TSP-Link accessible
Attribute (RW)
Yes
Usage
eventID = tsplink.trigger[N].stimulus
tsplink.trigger[N].stimulus = eventID
eventID
N
Details
To disable automatic trigger assertion on the synchronization line, set this attribute to zero (0).
Do not use this attribute when triggering under script control. Use tsplink.trigger[N].assert() instead.
7-362
Series 2600B System SourceMeter® Instrument Reference Manual
Affected by
Instrument reset
Recall setup
TSP-Link trigger N reset
The event identifier for the triggering event
The trigger line (1 to 3)
Where saved
Default value
Not saved
0
2600BS-901-01 Rev. B / May 2013