Status.reset(); Status.standard - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

status.reset()

This function resets all bits in the status model.
Type TSP-Link accessible
Function Yes
Usage
status.reset()
Details
This function clears all status data structure registers (enable, event, NTR, and PTR) to their default values. For
information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
E-1) and
Example
status.reset()
Also see
Status model

status.standard.*

These attributes manage the standard event status register set of the status model.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
standardRegister = status.standard.condition
standardRegister = status.standard.enable
standardRegister = status.standard.event
standardRegister = status.standard.ntr
standardRegister = status.standard.ptr
status.standard.enable = standardRegister
status.standard.ntr = standardRegister
status.standard.ptr = standardRegister
standardRegister
2600BS-901-01 Rev. B / May 2013
Affected by
Enable and transition registers
(on page 5-14, on page E-1)
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The status of the standard event status register; a zero (0) indicates no bits set (also
send 0 to clear all bits); other values indicate various bit settings
Where saved
(on page E-19).
Resets the instrument status model.
Where saved
- -
Not saved
Not saved
Not saved
Not saved
Not saved
Section 7: TSP command reference
Default value
Status register set contents
Default value
- -
Not applicable
0
0
0
253 (All bits set)
(on page
7-317