Lan.config.dns.dynamic; Lan.config.dns.hostname - Keithley 2601B Reference Manual

Section 7: TSP command reference
Also see

lan.config.dns.dynamic

lan.config.dns.hostname

lan.config.dns.verify
lan.restoredefaults()
lan.config.dns.dynamic
Enables or disables the dynamic DNS registration.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
state = lan.config.dns.dynamic
lan.config.dns.dynamic = state
state
Details
Dynamic DNS registration works with DHCP to register the host name with the DNS server. The host name is
specified in the lan.config.dns.hostname attribute.
Example
print(lan.config.dns.dynamic)
Also see
lan.config.dns.hostname
lan.restoredefaults()
lan.config.dns.hostname
This attribute defines the dynamic DNS host name.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
hostName = lan.config.dns.hostname
lan.config.dns.hostname = hostName
hostName
7-114
Series 2600B System SourceMeter® Instrument Reference Manual
(on page 7-114)
(on page 7-114)
(on page 7-115)
(on page 7-121)
Affected by
LAN restore defaults
The dynamic DNS registration state. It may be one of the following values:
1 or lan.ENABLE: Enabled
0 or lan.DISABLE: Disabled
(on page 7-114)
(on page 7-121)
Affected by
Not applicable
The host name to use for dynamic DNS registration; the host name must:
•
be a string of 63 characters or less
•
start with a letter
•
end with a letter or digit
•
contain only letters, digits, and hyphens
Where saved Default value
Nonvolatile memory 1 (lan.ENABLE)
Outputs the dynamic registration state.
If dynamic DNS registration is enabled, the
response is:
1.00000e+00
Where saved
Nonvolatile memory
2600BS-901-01 Rev. B / May 2013
Default value
Instrument specific
(see Details)