Lan.status.port.dst; Lan.status.port.rawsocket - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual
Also see
None

lan.status.port.dst

This attribute contains the LAN dead socket termination port number.
Type TSP-Link accessible
Attribute (R) Yes
Usage
port = lan.status.port.dst
port
Details
This attribute holds the TCP port number used to reset all other LAN socket connections.
To reset all LAN connections, open a connection to the DST port number.
Example
print(lan.status.port.dst)
Also see
None

lan.status.port.rawsocket

This attribute contains the LAN raw socket connection port number.
Type TSP-Link accessible
Attribute (R) Yes
Usage
port = lan.status.port.rawsocket
port
Details
Stores the TCP port number used to connect the instrument and to control the instrument over a raw socket
communication interface.
Example
print(lan.status.port.rawsocket)
Also see
None
2600BS-901-01 Rev. B / May 2013
Affected by
Not applicable
Dead socket termination socket port number
Outputs the LAN dead socket termination port
number, such as:
5.03000e+03
Affected by
Not applicable
Raw socket port number
Outputs the LAN raw socket port number, such as:
5.02500e+03
Section 7: TSP command reference
Where saved Default value
Not applicable Not applicable
Where saved Default value
Not applicable Not applicable
7-125