Smux.trigger.source_Complete_Event_Id - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

smuX.trigger.SOURCE_COMPLETE_EVENT_ID

This constant contains the source complete event number.
Type TSP-Link accessible
Constant Yes
Usage
eventID = smuX.trigger.SOURCE_COMPLETE_EVENT_ID
eventID
X
Details
Set the stimulus of any trigger object to the value of this constant to have the trigger object respond to source
complete events from this source-measure unit (SMU).
Also see
Triggering
smuX.trigger.SWEEP_COMPLETE_EVENT_ID
This constant contains the sweep complete event number.
Type TSP-Link accessible
Constant Yes
Usage
eventID = smuX.trigger.SWEEP_COMPLETE_EVENT_ID
eventID
X
Details
Set the stimulus of any trigger object to the value of this constant to have the trigger object respond to sweep
complete events from this SMU.
Also see
Triggering
smuX.trigger.SWEEPING_EVENT_ID
This constant contains the sweeping event number.
Type TSP-Link accessible
Constant Yes
2600BS-901-01 Rev. B / May 2013
Affected by
The source action complete event number
Source-measure unit (SMU) channel (for example,
smua.trigger.SOURCE_COMPLETE_EVENT_ID applies to SMU channel A)
(on page 3-32)
Affected by
The sweep complete event number
Source-measure unit (SMU) channel (for example,
smua.trigger.SWEEP_COMPLETE_EVENT_ID applies to SMU channel A)
(on page 3-32)
Affected by
Section 7: TSP command reference
Where saved Default value
Where saved Default value
Where saved Default value
7-253