Buffervar.sourceranges - Keithley 2601B Reference Manual

Section 7: TSP command reference
Also see
bufferVar.measurefunctions
bufferVar.measureranges
bufferVar.n (on page 7-24)
bufferVar.readings
bufferVar.sourcefunctions

bufferVar.sourceranges

bufferVar.sourcevalues
bufferVar.statuses
bufferVar.timestamps
Reading buffers
\
bufferVar.sourceranges
This attribute contains the source range that was used for readings stored in a specified reading buffer.
Type TSP-Link accessible
Attribute (R) Yes
sourcerange = bufferVar.sourceranges[N]
sourcerange
bufferVar
N
Details
The sourceranges buffer recall attribute is like an array (a Lua table) of full-scale range values for the source
range used when the measurement was made.
For dedicated reading buffers, all buffer attributes are saved to nonvolatile memory only when the reading buffer
is saved to nonvolatile memory.
Example 1
sourcerange = smua.nvbuffer1.sourceranges[1]
7-28
(on page 7-22)
(on page 7-23)
(on page 7-25)
(on page 7-26)
(on page 7-28)
(on page 7-29)
(on page 7-30)
(on page 7-32)
(on page 3-6)
Affected by
Clearing the buffer
The source range used to acquire reading number N in the specified buffer
The reading buffer; can be a dynamically allocated buffer (user-defined), or a
dedicated reading buffer (such as smua.nvbuffer1)
The reading number (1 to bufferVar.n)
Series 2600B System SourceMeter® Instrument Reference Manual
Where saved
See Details
Store the source range that was used for the
first reading stored in source-measure unit
(SMU) A, dedicated reading buffer 1.
Default value
Not applicable
2600BS-901-01 Rev. B / May 2013