Step 1: Identify And Record The Existing Ip Configuration - Keithley 2601B Reference Manual

Appendix C: LAN concepts and settings
Contact your corporate information technology (IT) department for permission before you connect
the Series 2600B to a corporate network.
If you have problems, see
Record all network configurations before modifying any existing network configuration information on
the network interface card. Once the network configuration settings are updated, the previous
information is lost. This may cause a problem reconnecting the host computer to a corporate
network, particularly if DHCP Enabled = NO (disabled).
Be sure to return all settings to their original configuration before reconnecting the host computer to a
corporate network. Failure to do this could result in loss of data. Contact your system administrator
for more information.

Step 1: Identify and record the existing IP configuration

To identify the existing IP configuration:
1. Open a command prompt window:
Microsoft
a. Click Start and select Run.
b. In the Open field, type cmd.
c. Click OK.
Microsoft Windows Vista
a. Click Start.
b. Select All Programs > Accessories > Command Prompt.
2. At the command prompt, type ipconfig/all and press the Enter key. A list of existing IP
configuration information for your computer is displayed.
C-2
LAN troubleshooting suggestions
Windows 2000 or Windows XP:
® ®
or Windows 7:
®
Series 2600B System SourceMeter® Instrument Reference Manual
(on page 8-7).
2600BS-901-01 Rev. B / May 2013