Keithley 2601B Reference Manual page 641

Series 2600B System SourceMeter® Instrument Reference Manual
Bit
B0
B1
B2
B3-B9
B10
B11
B12
B13
B14
B15
As an example, to set bit B1 of the operation status trigger overrun summary enable register, set
status.operation.trigger_overrun.enable = status.operation.trigger_overrun.SMUA.
In addition to the above constants, operationRegister can be set to the numeric equivalent of the bit to set.
To set more than one bit of the register, set operationRegister to the sum of their decimal weights. For
example, to set bits B1 and B10, set operationRegister to 1,026 (which is the sum of 2 + 1,024).
2600BS-901-01 Rev. B / May 2013
Value
Not used
status.operation.trigger_overrun.SMUA
status.operation.trigger_overrun.SMUB
Not used
status.operation.trigger_overrun.TRIGGER_BLENDER
status.operation.trigger_overrun.TRGBLND
status.operation.trigger_overrun.TRIGGER_TIMER
status.operation.trigger_overrun.TRGTMR
status.operation.trigger_overrun.DIGITAL_IO
status.operation.trigger_overrun.DIGIO
status.operation.trigger_overrun.TSPLINK
status.operation.trigger_overrun.LAN
Not used
Section 7: TSP command reference
Description
Not applicable.
Set bit indicates one of the enabled bits
in the operation status SMU A trigger
overrun event register is set.
Bit B1 decimal value: 2
This bit is only available on Models
2602B/2604B/2612B/2614B/2634B/
2636B. Set bit indicates one of the
enabled bits in the operation status
SMU B trigger overrun event register is
set.
Bit B2 decimal value: 4
Not applicable.
Set bit indicates one of the enabled bits
in the operation status trigger blender
overrun event register is set.
Bit B10 decimal value: 1,024
Set bit indicates one of the enabled bits
in the operation status trigger timer
overrun event register is set.
Bit B11 decimal value: 2,048
This bit is only available on Models
2601B/2602B/2611B/
2612B/2635B/2636B. Set bit indicates
one of the enabled bits in the operation
status digital I/O overrun event register
is set.
Bit B12 decimal value: 4,096
This bit is only available on Models
2601B/2602B/2611B/
2612B/2635B/2636B. Set bit indicates
one of the enabled bits in the operation
status TSP-Link overrun event register
is set.
Bit B13 decimal value: 8,192
Set bit indicates one of the enabled bits
in the operation status LAN trigger
overrun event register is set.
Bit B14 decimal value: 16,384
Not applicable.
7-301