Bit.bitand(); Bit.bitor() - Keithley 2601B Reference Manual

Section 7: TSP command reference
Example
beeper.enable = beeper.ON
beeper.beep(2, 2400)
Also see
beeper.beep()

bit.bitand()

This function performs a bitwise logical AND operation on two numbers.
Type TSP-Link accessible
Function No
Usage
result = bit.bitand(value1, value2)
result
value1
value2
Details
Any fractional parts of value1 and value2 are truncated to form integers. The returned result is also an
integer.
Example
testResult = bit.bitand(10, 9)
print(testResult)
Also see
Bit manipulation and logic operations

bit.bitor()

(on page 7-8)
bit.bitxor() (on page 7-9)
bit.bitor()
This function performs a bitwise logical OR operation on two numbers.
Type TSP-Link accessible
Function No
Usage
result = bit.bitor(value1, value2)
result
value1
value2
7-8
(on page 7-7)
Affected by
Result of the logical AND operation
Operand for the logical AND operation
Operand for the logical AND operation
(on page 5-3)
Affected by
Result of the logical OR operation
Operand for the logical OR operation
Operand for the logical OR operation
Series 2600B System SourceMeter® Instrument Reference Manual
Enables the beeper and generates a
two-second, 2400 Hz tone.
Where saved
Performs a logical AND operation on decimal 10
(binary 1010) with decimal 9 (binary 1001), which
returns a value of decimal 8 (binary 1000).
Output:
8.00000e+00
Where saved
Default value
Default value
2600BS-901-01 Rev. B / May 2013