Trigger.timer[N].Reset(); Trigger.timer[N].Stimulus - Keithley 2601B Reference Manual

Section 7: TSP command reference

trigger.timer[N].reset()

This function resets some of the trigger timer settings to their factory defaults.
Type TSP-Link accessible
Function Yes
Usage
trigger.timer[N].reset()
N
Details
The trigger.timer[N].reset() function resets the following attributes to their factory defaults:
•
trigger.timer[N].count
•
trigger.timer[N].delay
•
trigger.timer[N].delaylist
•
trigger.timer[N].passthrough
•

trigger.timer[N].stimulus

It also clears trigger.timer[N].overrun.
Example
trigger.timer[1].reset()
Also see
trigger.timer[N].count
trigger.timer[N].delay
trigger.timer[N].delaylist
trigger.timer[N].overrun
trigger.timer[N].passthrough
trigger.timer[N].stimulus
trigger.timer[N].stimulus
This attribute specifies which event starts the timer.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
eventID = trigger.timer[N].stimulus
trigger.timer[N].stimulus = eventID
eventID
N
7-348
Series 2600B System SourceMeter® Instrument Reference Manual
Affected by
Trigger timer number (1 to 8)
(on page 7-344)
(on page 7-345)
(on page 7-345)
(on page 7-346)
(on page 7-347)
(on page 7-348)
Affected by
Instrument reset
Recall setup
Trigger timer N reset
The event that triggers the timer delay
Trigger timer number (1 to 8)
Where saved Default value
Resets the attributes associated with timer 1 back
to factory default values.
Where saved
Not saved
2600BS-901-01 Rev. B / May 2013
Default value
0