Display.screen; Display.sendkey() - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

display.screen

This attribute contains the selected display screen.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
displayID = display.screen
display.screen = displayID
displayID
Details
Setting this attribute selects the display screen for the front panel. This performs the same action as pressing the
DISPLAY key on the front panel. The text for the display screen is set by display.settext().
Read this attribute to determine which of the available display screens was last selected.
Example
display.screen = display.SMUA
Also see
display.settext()

display.sendkey()

This function sends a code that simulates the action of a front panel control.
Type TSP-Link accessible
Function Yes
Usage
display.sendkey(keyCode)
keyCode
2600BS-901-01 Rev. B / May 2013
Affected by
Instrument reset
Recall setup
One of the following values:
•
0 or display.SMUA: Displays source-measure and compliance for SMU A
•
1 or display.SMUB: Displays source-measure and compliance for SMU B
•
2 or display.SMUA_SMUB: Displays source-measure for SMU A and SMU B
•
3 or display.USER: Displays the user screen
(on page 7-76)
Affected by
A parameter that specifies the key press to simulate; see Details for more
information
Section 7: TSP command reference
Where saved Default value
Saved setup Models 2601B/2611B/2635B:
0 (display.SMUA)
Models
2602B/2604B/2612B/2614B/2634B/
2636B: 2 (display.SMUA_SMUB)
Selects the source-measure and compliance
limit display for SMU A.
Where saved Default value
7-73