Buffervar.sourceoutputstates - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual
Example 2
printbuffer(1, 10, smua.nvbuffer1.sourcefunctions)
Also see
bufferVar.measurefunctions
bufferVar.measureranges
bufferVar.n
bufferVar.readings

bufferVar.sourceoutputstates

bufferVar.sourceranges
bufferVar.sourcevalues
bufferVar.statuses
bufferVar.timestamps
Reading buffers
bufferVar.sourceoutputstates
This attribute indicates the state of the source output for readings that are stored in a specified buffer.
Type TSP-Link accessible
Attribute (R) Yes
Usage
state = bufferVar.sourceoutputstates[N]
state
bufferVar
N
Details
The sourceoutputstates buffer recall attribute is similar to an array (a Lua table) of strings. This array
indicates the state of the source output ("Off" or "On") at the time of the measurement.
For dedicated reading buffers, all buffer attributes are saved to nonvolatile memory only when the reading buffer
is saved to nonvolatile memory.
Example
printbuffer(1, 1, smua.nvbuffer1.sourceoutputstates)
2600BS-901-01 Rev. B / May 2013
(on page 7-22)
(on page 7-23)
(on page 7-24)
(on page 7-25)
(on page 7-27)
(on page 7-28)
(on page 7-29)
(on page 7-30)
(on page 7-32)
(on page 3-6)
Affected by
Clearing the buffer
The output state ("Off" or "On") when reading N of the specified buffer was
acquired
The reading buffer; can be a dynamically allocated buffer (user-defined), or a
dedicated reading buffer (such as smua.nvbuffer1)
The reading number (1 to bufferVar.n)
Section 7: TSP command reference
Print the source function used
for 10 readings stored in
source-measure unit (SMU)
channel A, dedicated reading
buffer 1.
Example output:
Voltage, Voltage,
Voltage, Voltage,
Voltage, Voltage,
Voltage, Voltage,
Voltage, Voltage
Where saved
See Details
Print the source output for the
first reading stored in source-
measure unit (SMU) channel A,
dedicated reading buffer 1.
Example output:
On
Default value
Not applicable
7-27