Capabilities And Features - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

Capabilities and features

All Series 2600B System SourceMeter
•
4.5, 5.5, or 6.5 digit display resolution
•
Resistance and power measurement functions
•
Four-quadrant sink or source operation
•
Contact check function (not available on the Models 2604B, 2614B, and 2634B)
•
High-capacitance mode for load impedance up to 50 µF (microfarads)
•
Linear, logarithmic, and custom sweeping and pulsing
•
Filtering to reduce reading noise
•
Trigger model supports extensive triggering and synchronization schemes at hardware speeds
•
Internal memory stores five user setup options
•
Dedicated reading buffers that can each store and recall over 140,000 measurements; additional
dynamic reading buffers can be created
•
USB flash drive access for saving data buffers, test scripts, and user setups
•
Digital I/O port: Allows the Series 2600B to control other devices (Digital I/O lines not available on
the Models 2604B, 2614B, and 2634B)
•
Web-based characterization tool that provides easy access to data gathering, sweeping, and
pulsing features
•
®
LXI
•
Embedded TSP scripting engine accessible from any host interface; responds to high-speed test
scripts comprised of instrument control commands
•
TSP-Link
each other; advanced Test Script Processor (TSP
script execution across the TSP-Link network (not available on the Models 2604B, 2614B, and
2634B)
•
Supports IEEE-488 (GPIB), RS-232, Universal Serial Bus (USB), and ethernet local area network
(LAN) connections
2600BS-901-01 Rev. B / May 2013
version 1.4 Core 2011 compliance
®
expansion bus that allows TSP-enabled instruments to trigger and communicate with
®
instruments have the following features:
®
) scripting engine features enable parallel
Section 1: Introduction
1-3