Digital I/O; Display - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual

Digital I/O

The Models 2604B, 2614B, and 2634B do not have digital input/output lines. The commands to
control the digital input/output lines are not available for these models.
The digital I/O port of the instrument can control external circuitry (such as a component handler for
binning operations).
The I/O port has 14 lines. Each line can be at TTL logic state 1 (high) or 0 (low). See the pinout
diagram in
There are commands to read and write to each individual bit, and commands to read and write to the
entire port.
digio.readbit()
digio.readport()
digio.trigger[N].assert()
digio.trigger[N].clear()
digio.trigger[N].EVENT_ID
digio.trigger[N].mode
digio.trigger[N].overrun
digio.trigger[N].pulsewidth
digio.trigger[N].release()
digio.trigger[N].reset()
digio.trigger[N].stimulus
digio.trigger[N].wait()
digio.writebit()
digio.writeport()
digio.writeprotect

Display

display.clear()
display.getannunciators()
display.getcursor()
display.getlastkey()
display.gettext()
display.inputvalue()
display.loadmenu.add()
display.loadmenu.catalog()
display.loadmenu.delete()
display.locallockout
display.menu()
display.numpad
display.prompt()
display.screen
display.sendkey()
display.setcursor()
display.settext()
display.smuX.limit.func
display.smuX.measure.func
display.smuX.digits
display.trigger.clear()
display.trigger.EVENT_ID
display.trigger.overrun
display.trigger.wait()
display.waitkey()
2600BS-901-01 Rev. B / May 2013
Digital I/O port (on page 3-83) for additional information.
(on page 7-49)
(on page 7-50)
(on page 7-51)
(on page 7-51)
(on page 7-52)
(on page 7-52)
(on page 7-54)
(on page 7-54)
(on page 7-55)
(on page 7-55)
(on page 7-56)
(on page 7-58)
(on page 7-58)
(on page 7-59)
(on page 7-60)
(on page 7-60)
(on page 7-61)
(on page 7-62)
(on page 7-63)
(on page 7-64)
(on page 7-65)
(on page 7-67)
(on page 7-68)
(on page 7-69)
(on page 7-69)
(on page 7-70)
(on page 7-71)
(on page 7-71)
(on page 7-73)
(on page 7-73)
(on page 7-75)
(on page 7-76)
(on page 7-77)
(on page 7-78)
(on page 7-77)
(on page 7-79)
(on page 7-79)
(on page 7-79)
(on page 7-80)
(on page 7-81)
Section 5: Introduction to TSP operation
5-5