Trigger.clear(); Trigger.event_Id - Keithley 2601B Reference Manual

Section 7: TSP command reference

trigger.clear()

This function clears the command interface trigger event detector.
Type TSP-Link accessible
Function No
Usage
trigger.clear()
Details
The trigger event detector indicates if a trigger event has been detected since the last trigger.wait() call.
trigger.clear() clears the trigger event detector and discards the history of command interface trigger
events.
Also see
trigger.wait() (on page 7-350)

trigger.EVENT_ID

This constant contains the command interface trigger event number.
Type TSP-Link accessible
Constant Yes
Usage
eventID = trigger.EVENT_ID
eventID
Details
You can set the stimulus of any trigger object to the value of this constant to have the trigger object respond to
command interface trigger events.
Example
trigger.timer[1].stimulus = trigger.EVENT_ID
Also see
None
7-342
Series 2600B System SourceMeter® Instrument Reference Manual
Affected by
Affected by
The event ID for the command interface triggers
Where saved Default value
Where saved Default value
Sets the trigger stimulus of trigger
timer 1 to the command interface
trigger event.
2600BS-901-01 Rev. B / May 2013