Errorqueue.clear() - Keithley 2601B Reference Manual

Section 7: TSP command reference
Example
key = display.waitkey()
print(key)
Also see
Capturing key-press codes
display.getlastkey()
display.sendkey()
display.settext()

errorqueue.clear()

This function clears all entries out of the error queue.
Type TSP-Link accessible
Function Yes
Usage
errorqueue.clear()
Details
See the Error queue
Also see
Error queue (on page E-3)
errorqueue.count
errorqueue.next()
7-82
(on page 3-81)
(on page 7-63)
(on page 7-73)
(on page 7-76)
Affected by
(on page E-3) topic for additional information about the error queue.
(on page 7-83)
(on page 7-83)
Series 2600B System SourceMeter® Instrument Reference Manual
Pause script execution until the operator presses
a key or the navigation wheel
navigation wheel.
If the output is:
8.60000e+01
It indicates that the MEAS(A) key was pressed.
Where saved
, or rotates the
Default value
2600BS-901-01 Rev. B / May 2013