Keithley 2601B Reference Manual page 614

Section 7: TSP command reference
For information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
page E-1) and
the following table.
Bit Value
B0 Not used
B1 status.operation.instrument.SMUA
B2 status.operation.instrument.SMUB
B3-B9 Not used
B10 status.operation.instrument.TRIGGER_BLENDER
status.operation.instrument.TRGBLND
B11 status.operation.instrument.TRIGGER_TIMER
status.operation.instrument.TRGTMR
B12
status.operation.instrument.DIGITAL_IO
status.operation.instrument.DIGIO
B13 status.operation.instrument.TSPLINK
B14 status.operation.instrument.LAN
B15 Not used
As an example, to set bit B1 of the operation status instrument summary enable register, set
status.operation.instrument.enable = status.operation.instrument.SMUA.
In addition to the above constants, operationRegister can be set to the numeric equivalent of the bit to set.
To set more than one bit of the register, set operationRegister to the sum of their decimal weights. For
example, to set bits B1 and B10, set operationRegister to 1,026 (which is the sum of 2 + 1,024).
Bit
Binary value
Decimal
Weights
7-274
Enable and transition registers
B7 B6
0/1 0/1
128 64
7 6
(2 ) (2 )
Series 2600B System SourceMeter® Instrument Reference Manual
(on page E-19). The individual bits of this register are defined in
Description
Not applicable.
Set bit indicates one or more
enabled bits for the operation
status SMU A summary register is
set.
Bit B1 decimal value: 2
This bit is only available on Models
2602B/2604B/2612B/2614B/2634B
/2636B. Set bit indicates one or
more enabled bits for the operation
status SMU B summary register is
set.
Bit B2 decimal value: 4
Not applicable.
Set bit indicates one or more
enabled bits for the operation
status trigger blender summary
register is set.
Bit B10 decimal value: 1,024.
Set bit indicates one or more
enabled bits for the operation
status trigger timer summary
register is set.
Bit B11 decimal value: 2,048
This bit is only available on Models
2601B/2602B/2611B/
2612B/2635B/2636B. Set bit
indicates one or more enabled bits
for the operation status digital I/O
summary register is set.
Bit B12 decimal value: 4,096
This bit is only available on Models
2601B/2602B/2611B/
2612B/2635B/2636B. Set bit
indicates one or more enabled bits
for the operation status TSP-Link
summary register is set.
Bit B13 decimal value: 8,192
Set bit indicates one or more
enabled bits for the operation
status LAN summary register is set.
Bit B14 decimal value: 16,384
Not applicable.
B5 B4 B3
0/1 0/1 0/1
32 16 8
5 4 3
(2 ) (2 ) (2 )
Status register set contents
B2 B1 B0
0/1 0/1 0/1
4 2 1
2 1 0
(2 ) (2 ) (2 )
2600BS-901-01 Rev. B / May 2013
(on