Trigger.timer[N].Wait(); Trigger.wait() - Keithley 2601B Reference Manual

Section 7: TSP command reference

trigger.timer[N].wait()

This function waits for a trigger.
Type TSP-Link accessible
Function Yes
Usage
triggered = trigger.timer[N].wait(timeout)
triggered
N
timeout
Details
If one or more trigger events were detected since the last time trigger.timer[N].wait() or
trigger.timer[N].clear() was called, this function returns immediately.
After waiting for a trigger with this function, the event detector is automatically reset and rearmed. This is true
regardless of the number of events detected.
Example
triggered = trigger.timer[3].wait(10)
print(triggered)
Also see
trigger.timer[N].clear()

trigger.wait()

This function waits for a command interface trigger event.
Type TSP-Link accessible
Function No
Usage
triggered = trigger.wait(timeout)
triggered
timeout
7-350
Series 2600B System SourceMeter® Instrument Reference Manual
Affected by
Trigger detection indication
Trigger timer number (1 to 8)
Maximum amount of time in seconds to wait for the trigger
(on page 7-344)
Affected by
true: A trigger was detected during the timeout period
false: No triggers were detected during the timeout period
Maximum amount of time in seconds to wait for the trigger
Where saved Default value
Waits up to 10 seconds for a trigger on
timer 3.
If false is returned, no trigger was
detected during the 10-second timeout.
If true is returned, a trigger was detected.
Where saved Default value
2600BS-901-01 Rev. B / May 2013