Keithley 2601B Reference Manual page 499

Series 2600B System SourceMeter® Instrument Reference Manual
Usage
tbl = QueryPulseConfig(tag)
tag
tbl
Details
Once a pulse train has been configured and assigned to a tag, it is often desirable to inspect the settings of this
preconfigured pulse train. The QueryPulseConfig() command can be used for this purpose.
This function returns a table that contains the settings associated with the tag input parameter.
Return values:
tostring()
tag
smu
func
bias
level
start
stop
limit
ton
toff
points
buf
sync_in
sync_out
sourcevalues
2600BS-901-01 Rev. B / May 2013
Numeric identifier to be assigned to the defined pulse train
Returned table
A function that returns most settings in a string that is convenient for printing
Identifying tag for this pulse train
The SMU configured for pulsing
Pulse function:
smuX.OUTPUT_DCAMPS or
smuX.OUTPUT_DCVOLTS
Pulse bias level
Pulse level for non sweeping pulses
Starting level for sweep pulses
Ending level for sweep pulses
Limit value
On time in seconds
Off time in seconds
The number of points in this pulse train
Reference to the buffer that contains measurement data
The sync_in digio line, if used
The sync_out digio line, if used
A table containing the source value for each point in the pulse train
Section 7: TSP command reference
7-159