Display.trigger.clear(); Display.trigger.event_Id; Display.trigger.overrun - Keithley 2601B Reference Manual

Series 2600B System SourceMeter® Instrument Reference Manual
Also see
display.smuX.limit.func

display.trigger.clear()

This function clears the front-panel trigger event detector.
Type TSP-Link accessible
Function Yes
Usage
display.trigger.clear()
Details
The trigger event detector remembers if an event has been detected since the last display.trigger.wait()
call. This function clears the trigger event detector and discards the previous history of TRIG key presses.
This attribute also clears the display.trigger.overrun attribute.
Also see

display.trigger.overrun

display.trigger.wait()

display.trigger.EVENT_ID

This constant is the event ID of the event generated when the front-panel TRIG key is pressed.
Type TSP-Link accessible
Constant Yes
Usage
eventID = display.trigger.EVENT_ID
eventID
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to front-panel trigger
key events.
Also see
None
display.trigger.overrun
This attribute contains the event detector overrun status.
Type TSP-Link accessible
Attribute (R) Yes
2600BS-901-01 Rev. B / May 2013
(on page 7-77)
Affected by
(on page 7-79)
(on page 7-80)
Affected by
The trigger event number
Affected by
Display trigger clear
Instrument reset
Recall setup
Section 7: TSP command reference
Where saved Default value
Where saved Default value
Where saved Default value
Not saved false
7-79