Chapter 2
5) Remove the 2 fixing nip releasing screws [1].
[1]
F-2-89
6) Check the fixing web for any slack; as necessary,
perform steps 7) and 8).
7) Remove the 3 screws [1] and the fixing knob [2];
then, detach the fixing front cover [3].
[1]
[2]
[1]
[3]
F-2-90
8) Turn the gear [1] counterclockwise (viewing the
machine from the front) to remove the slack.
F-2-91
2-24
[1]
[1]
[1]
9) Mount back the fixing front cover and the fixing
knob by reversing the work in step 7).
10) Close the middle cover.
11) Close the reversal delivery cover.
12) Close the fixing/feeding assembly.
13) Lock the releasing lever in place; then, close the
front cover.
2.2.11 Fitting the Black
Toner Bottle
1) Take out the black toner bottle from its packaging
box.
2) Open the black toner supply cover [1]; then, push
down the lock lever [2].
[1]
F-2-92
3) Hold the black toner bottle [1] as shown in the
figure; then, turn the cap [2] in the direction of the
arrow to detach from the bottle.
[2]
[1]
F-2-93
0002-6699
[2]