Sram Pcb; Removing The Rear Cover (Upper) - Canon iR C6800 Series Service Manual

Chapter 4
4.7.4.5 Removing the SRAM
Board
1) Release the 2 locks [1], and detach the SRAM
board [2].
[2]
[1]
F-4-74
4.7.4.6
Removing
Expansion Bus PCB
1) Remove the 2 screws [1], and detach the expansion
bus PCB [2].
[2]
F-4-75
4-38
0003-5544
[1]
the
0003-5545
[1]
4.7.4.7 After Replacing the
Expansion PCB
Mount the SRAM PCB [1] removed from the existing
PCB to the newly mounted expansion bus PCB [2].
[1]
F-4-76

4.7.5 SRAM PCB

4.7.5.1 Removing the Rear
Cover (upper)
1) Free the cable [2] from the 2 cable clamps [1].
2) Remove the 2 screws [3].
[3]
[2] [1]
F-4-77
0003-5557
[2]
0003-8313