If Not Connected To A Network - Canon iR C6800 Series Service Manual

Chapter 2
Areas to Avoid
inside the machine (behind the front cover)
louver
grip slot
3) As appropriate, attach the 3 included labels ([1],
[2], [3]) to the locations indicated in the figure:
[1] Do Not Copy label (non Japanese model)
[2] Cleaning Instructions label (non Japans model)
[3] ADF size label
[2]
[1]
F-2-123
Attaching the ADF Size Label
Spread the ADF size guide plate [1] fully; then, match
segment A of the plate and the A4/A3 marking of the
label [2].
A4
A
A3
F-2-124
2-34
[2]
[1]
4) Fit the touch pen [1] in place on the control panel.
F-2-125
5) Clean up the area around the machine, and fill out
the service book.
6) Make necessary settings in user mode (date, time)
and service mode (COPIER>OPTION>USER).
When shipped from the factory, the 230 V model
is set to English for its language of display. If needed,
change the setting.
7) Execute the following service mode item, and store
the output away in the service book case:
COPIER>FUNCTION>MISC P>P PRINT.
In the course of installing the machine, be sure to
record the various adjustment values indicated by P
PRINT (printout) to the Service Label attached behind
the front cover.
2.2.25 If Not Connected to
a Network
MEMO
Memo
If the machine is not connected to a network, its
control panel will display the message "Check
Connection to the Network." To disable the
message, set the following service mode item to
"0":
COPIER> OPTION> BODY> NWERR SW (level 2)
[1]
0005-3940