Canon iR C6800 Series Service Manual page 66

Chapter 2
11) Fit the 2 included pickup assembly face plate [2]
over the holes [1] from which you have removed the
grips.
[1]
F-2-13
12) Remove the 2 screws [1], and rear right cover [2].
F-2-14
13) Fit the 2 grips [1] you removed in the foregoing
step in the compartment [2] found at the rear right of
the machine.
[2]
[1]
F-2-15
2-8
[2]
[1]
[2]
[1]
14) Fix the right cover (lower rear) [2] in place with 2
screws [1].
[2]
F-2-16
15) Shift down the 2 grips [1] on the delivery side as
shown so that they are inside the machine.
[1]
F-2-17
16) Fit the 2 included delivery assembly face plates
over the holes [1] in which you have fitted the grips.
[1]
[2]
F-2-18
[1]
[1]