3) Remove the 4 screws [1], and detach the face plate [2] of the host machine's rear cover (upper).
[1]
[2]
[1]
F-2-138
4) Connect the cable [1] of the controller to the host machine's connector [2].
[2]
[1]
F-2-139
5) Mount the controller [1] to the host machine's rear cover (upper) using 4 screws [2]. (Use the screws that come
with the controller.)
[2]
[2]
F-2-140
[1]
Chapter 2
2-43