Controller Fan - Canon iR C6800 Series Service Manual

system control ID No., you will not be able to register
a card to the machine while using NSA.
10) Download the card ID.
Keep the machine in a standby state, and download
the card ID through the NSA.
11) Check the count control.
Make the following selections in Additional
Function to bring up the Count Control screen:
system control settings>group ID control; then,
check to see that only the ID data you have
downloaded are indicated.
12) Check to see that the operation is normal.
Using a user card that has been registered to the
NSA, make copies; then, check that the number of
copies you have made are associated with the card
you have used in the machine.

4.7.9 Controller Fan

4.7.9.1 Removing the Delivery
Cover
1) Remove the 3 screws [1], and detach the delivery
cover [2].
1]
2]
F-4-103
4.7.9.2
Cover (middle)
1) Disconnect the connector [1].
2) Remove the 5 screws [2], and detach the left cover
(middle) [3].
[1]
[2]
F-4-104
4.7.9.3
Controller Fan
1) Disconnect the connector [1], and open the cable
0003-8286
guide [2].
2) Remove where 2 screws [3], and detach the
controller fan [4].
[4]
[3]
F-4-105
Removing the Left
[2]
[3]
Removing the
[2]
[1]
[3]
Chapter 4
0003-8295
0003-6143
4-45