Chapter 2
6) As necessary, perform the same work on the left
deck.
7) After changing the size, execute the following in
service mode to register the front deck paper size: for
the right deck, COPIER>OPTION>CST>P SZ C1;
for the left deck, COPIER>OPTION>CST>P SZ C2
(A4=0, B5=1, LTR=2).
8) Press the Reset key twice to end service mode.
2.2.16 Fitting the Color
Toner Cartridge
1) Take out the color toner cartridge (yellow,
magenta, cyan) from its packaging box.
2) Hold the color toner cartridge (yellow, magenta,
cyan) as shown with both hands, and turn it in the
direction of the arrows 10 times to even out the toner
inside it.
F-2-105
When turning the color toner cartridge, be sure
not to touch the shutter assembly or turn the knob;
otherwise, the toner can start to leak.
F-2-106
2-28
3) Check to see that the control panel indicates the
message "Set the Toner Cartridge."
4) Open the front cover.
5) Open the color toner supply cover [1].
0002-6703
F-2-107
6) Fit the Y toner cartridge [2] through the color toner
cartridge slot [1].
F-2-108
7) Turn the lock lever [1] clockwise to set the Y toner
cartridge [2] in place.
F-2-109
8) Close the color toner supply cover.
9) Close the front cover.
10) See that the control panel indicates the message
"Set the Toner Cartridge."
11) Repeat steps 4) through 9) to set the C toner
cartridge.
[1]
[1]
[2]
[2]
[1]